HP 100 Hot Melt Packaging Tape Clear 48mm x 50m 36/cs
General purpose grade hot melt packaging tape for manual or automated industrial sealing of lightweight cartons with minimal exposure to handling, shipping and load stress. HP 100® is engineered with an aggressive, high-tack adhesive and excellent holding power to keep carton seals intact.
Features & Benefits
- General purpose grade, light duty packaging tape
- Instant, permanent bond to a wide range of substrates and surfaces
- Special release coating for Good to the Core® performance and consistent, low force unwind off the roll
- High-tack synthetic rubber/resin hot melt adhesive featuring Hold Strong® technology for a long-lasting, secure seal
- Instant, permanent bond to a wide range of substrates and surfaces
- Special release coating for consistent, low force unwind off the roll
- Performs reliably to the core for efficient tape consumption
- High-tack adhesive for a long-lasting, secure seal
TYPICAL APPLICATIONS
- For manual or automated industrial carton sealing of lightweight cartons with minimal exposure to handling, shipping and load stress
CONSTRUCTION
- Overall Grade/Function: General Purpose
- Backing: 25 micron biaxially oriented polypropylene cast film
- Adhesive: Synthetic rubber/resin hot melt
Thickness 1.6 mils 0.041 mm
Tensile Strength (Longitudinal) 21 lbs/in width 36.8 N/10 mm
Tensile Strength (Transverse) 36 lbs/in width 63 N/10 mm
Elongation 150% 150%
Adhesion to Stainless Steel 43 oz/in width 4.71 N/10 mm
Adhesion to Backing (Hand Rolls) 18 oz/in width 1.97 N/10 mm
Adhesion to Backing (Machine Rolls) 4 oz/in width 0.44 N/10 mm
Holding Power to Fiberboard 10,000+ minutes 10,000+ minutes
Application Temperature Range 35 F to 110 F 2 C to 43 C
Service Temperature Range -20 F to 150 F -29 C to 66 C